JCB is introducing two articulated boom aerial work platforms, with a choice of full battery electric and diesel/electric hybrid drivelines. The A45E and A45EH deliver increased efficiency, enhanced operator access and higher levels of monitoring to increase productivity for customers.
Key features include:
- Maximum platform height of 13.84m with 7.47m forward reach
- Battery electric or diesel/electric hybrid drivelines
- 300kg lift capacity
- Secondary guarding, puncture-proof tyres, slew lock and emergency override
- JCB LiveLink real-time remote monitoring
High Capacity
JCB is building on its successful aerial work platform line-up by adding two articulated boom machines. The A45E is a full electric version of the previous AJ48D, offering zero emission working with all of that machine’s performance, working height and forward reach. The A45EH is a diesel/electric hybrid version of the same machine, ideal for working in more remote locations where an external power supply is not readily available.
The A45E is powered by eight 6V batteries, creating a 48V, 400AH operating system. The battery packs are located on either side of the lower chassis, maintaining a low centre of gravity for added stability and improved traction. The batteries power AC drive motors via motor controllers and the machine’s hydraulic pump through a hydraulic motor controller.
The A45EH uses a 14.8kW three-cylinder diesel engine and a 7.5kWa generator to power the machine’s eight 6V batteries. The engine is mounted on a swing-out tray, making it easier to service and maintain when required. A 40-litre fuel tank provides more than enough fuel for a full week of operation, making the machine an ideal low emission platform for more remote locations. The battery can also be plugged into a mains supply if available.
Both of the platforms have four-wheel drive and two-wheel steering as standard. The wheels are driven by four AC motors and these motors recover energy through regenerative braking, to prolong battery performance. As drive is provided to each individual wheel, the machine is capable of climbing up to 40% gradients. An oscillating axle ensures that maximum traction is maintained on rough ground when the boom is stowed. However, the axle is locked, to ensure machine stability, when the machine enters boom raise mode. Foam-filled, non-marking tyres are standard.
Maximum lift
The platform has three entry points for ease of access. There are four harness clipping locations, allowing the operator full access around the basket. The platform length is 0.84m and the width is 1.84m. A secondary guarding system is provided, automatically halting boom functions when triggered, to protect the operator and prevent crushing.
The booms are equipped with a Slew Acknowledgment feature, that ensures that the operator must register if the boom is slewed over the side of the chassis before driving when elevated. A Tilt Sensor prevents machine elevation when the chassis is on unlevel ground, tilting the machine to more than 5.
Maximum platform height is 13.84m on either model, with a horizontal reach of up to 7.47m, providing an up and over clearance of 7.48m. The lift capacity for both booms is 300kg.
JCB’s LiveLink telematics monitoring system provides real-time operating data on performance, service schedules and fault codes. Managers can remotely record engine operation, low fuel warnings, tilt sensor warnings and overload warnings. LiveLink also provide battery voltage, fuel level and platform load percentage data.
The A45E and A45EH deliver a higher lift capacity, with zero emission or low-emission hybrid power. The machines offer higher levels of efficiency, with higher levels of monitoring, delivering and enhanced operator experience and increased productivity.
New friendly display
These machines are equipped with a 5” colour display on the platform, providing operators with essential data. This intuitive interface enhances safety and protectivity on the job site.
In addition, the machines feature a unique control system that eliminates the need to switch between platform controls and ground controls. Operators can seamlessly operate the machine from either location, eliminating the hassle of switching control modes.
MAY BANK HOLIDAYS AND OPENING TIMES
With May fast approaching, we want to keep all of our valued customers informed about our depot operating hours during the next month.
All Gunn JCB depots will be closed on the following bank holidays:
– Monday, 1st May.
– Monday, 8th May.
– Monday, 29th May.
After the bank holidays, the depots will open their doors at 7:30 am on the subsequent Tuesday, and maintain normal operating hours of 7:30 am to 5:30 pm from Monday to Friday, unless stated otherwise.
During this time, we will operate our usual out-of-hours emergency callouts service (for which a charge applies) at 0800 004 2008 to provide our customers with peace of mind, should any breakdowns occur.
We wish you all enjoyable weekends and hope you can spend some quality time with friends and family.
New JCB Dealer – Midlands JCB
I am pleased to inform you of a new JCB dealer that is due to begin operations from 28th April, 2023. This new company, Midlands JCB, will acquire the three depots currently owned by Gunn JCB in Smethwick, Stoke-on-Trent and Hereford. This new business will become the main JCB Construction dealer for the West Midlands, Warwickshire, Staffordshire, Herefordshire and Worcestershire.
The new business will operate under the ownership and management of David Hill (MD) and Alistair Reekie (Sales Director). All existing Gunn JCB staff from these three depots will transfer to Midlands JCB, and the business will continue to operate from the existing premises. All our customers will continue to receive first class sales and after sales support for their JCB machinery from a dedicated, local JCB dealer. This change is an important step in the continued growth of JCB in a region that is set for considerable investment.
Furthermore, it will enable Gunn JCB, through its remaining six depots, to focus its operations in the North West of England, North Wales and the Isle of Man and continue to meet the growing needs of our customers in this area.
David Hill, MD Midlands JCB, commented, “This new business will build on the great work of Gunn JCB whilst allowing us to further focus on new opportunities in this very important growth region”.
Paul Hartshorn, MD Gunn JCB, said, “We thank all our customers for their much-valued business and know that they will continue to receive great support from Midlands JCB.”
For our customers who are in the area covered by the new dealer, you will shortly receive further communication from Midlands JCB, and you will see the three depots have new JCB Midlands signage installed. Your contact numbers remain the same, as do the depot staff and field service engineers, who will all continue to support your machines.
Midlands JCB and Gunn JCB look forward to working with all of our customers as we invest in our businesses to give you the best possible support.
Thank you
Paul Hartshorn
Managing Director
EASTER OPENING HOURS
Happy EASTER
This Easter, all 9 of the Gunn JCB depots will be closed for the long weekend.
We will close on Thursday 6th at 5.30 pm and reopen on Tuesday 11th at 7.30 am.
We will be operating an out-of-hours call-out service (0800 004 2008) for emergency requirements, for which a charge applies.
From all of us at Gunn JCB, we’d like to wish you a very Happy Easter!
Tax Relief Opportunities
100% Tax Relief for Sole Traders, Partnerships and Corporates
On the 15th of March 2023, the Chancellor announced a set of incentives for growth. Keen to continue to support UK businesses when the COVID recovery Super-deduction tax relief ends at the end of the month, Jeremy Hunt laid out his new measures effective from 1st April 2023.
100% tax relief will be available on eligible purchases like JCBs, plant, equipment, and commercial vehicles – offset against taxable profits via either the Annual Investment Allowance or Full Expensing.
Annual Investment Allowance (AIA) – Up to £1 Million Tax Relief £1 million tax relief
£1 million tax relief opportunity under the Annual Investment Allowance remains in place. Effectively benefitting from tax relief of £1 in taxable profits for every £1 spent on qualifying expenditure. The incentive to invest accelerates the tax relief into the year they were purchased, compared to writing down allowances (WDA), which are normally applied over several years.
This allowance is available to sole traders, partnerships and limited companies alike on qualifying new and used assets. Note cars are not eligible.
Corporation Tax Full Expensing – Unlimited Tax Relief on 100% of your investment
From 1 April 2023 until at least 31 March 2026, unlimited investments made by companies in qualifying new plant and machinery will qualify for a 100% first-year allowance for main rate assets. This means companies across the UK will be able to write off the full cost in the year of investment, known as full expensing. Expenditure on plant or machinery for leasing (likely to include non-operated plant hirers) is excluded from first -year capital allowances and cars are not eligible. In any event, speak to Tax Relief Promotion – Best Practice 3 your accountant or tax advisor for guidance if qualification for the relief is essential to your purchase decision. [inclusion of image below is optional]
Super-deduction 130% ends 31st March 2023.
This limited-time offer of enhanced tax relief formed part of the Government COVID-19 recovery package and ends as planned this March – but all is not lost. Although this incentive offered the full cost of assets plus a further 30% is deductible against corporation tax in the year the assets are bought the Corporation Tax rate applicable was 19%. When the incentive changes over to the Full Expensing allowance (100%) it coincides with the Corporation Tax increase to 25% for companies with £250,000 profits or more, so for them the net benefit is the same.
Access to Tax Relief That’s Easy on Cash Flow.
You can claim the Annual Investment Allowance and Corporation Tax full expensing relief on qualifying assets placed on Hire Purchase just as if you had paid cash; enabling you to preserve working capital, choose payment terms to suit your business and save the tax – even if only the deposit has been paid!
Gunn JCB is not a tax advisor or financial advisor; always seek advice from your accountant or finance director because every business’s circumstances are different. Businesses should not make investment decisions purely on a tax basis; there should be a compelling business case for the investment. UK business users only; terms apply.
Gunn JCB Ltd (Registered in England No: 0527818. Registered office: Atlantic Street, Broadheath, Altrincham, Cheshire. WA14 5DN) is authorised and regulated by the Financial Conduct Authority. Gunn JCB Ltd is a credit broker and JCB Finance Ltd are its preferred supplier of Finance. JCB Finance Ltd (registered in England No:972265 and whose registered address is: The Mill, High Street, Rocester, Staffs, ST14 5JW) is authorised and regulated by the Financial Conduct Authority (Firm Reference Number: 708332). We receive a commission from JCB Finance which is a tiered flat fee that is based on the value of the finance agreement. These payments are not additional fees that you will have to pay and do not affect the amount you pay under your finance agreement. Finance is restricted to business users only in the United Kingdom, subject to acceptance by JCB Finance Ltd. Terms apply
AWARD WINNING JCB ELECTRIC MINI HITS 1,000TH MACHINE
JCB’s double-award winning electric mini excavator today marked another significant milestone in its short history – the production of the 1,000th machine.
We are delighted with the success of JCB’s electric mini excavator, which is proving very popular around the world, particularly in North America, France and the UK where there is a growing demand for zero emissions equipment operating in urban environments.
Lord Bamford | JCB Chairman
JCB has been at the forefront of the development of electric technology to meet customers’ demands for zero-emission products. The company has led the way by introducing a battery-electric solution for smaller machines.
The 19C-1E is a staggering five times quieter than its diesel counterpart and can be fully charged in under two hours and can complete a typical full shift on a single charge. The model has been a big hit with companies working inside buildings and in emissions and noise-sensitive inner-city areas. It is perfect for working indoors or outdoors, in factories, tunnels or basements, for digging foundations, or on utility projects.
In 2019, the 19C-1E scooped one of the automotive industry’s most prestigious honours when the Royal Automobile Club presented JCB with the Dewar Trophy for ‘Outstanding Technical Achievement in the British Automotive Industry’ for the development of the machine. The following year, the Royal Academy of Engineering in the UK announced that the 19C-1E had won the MacRobert Award, a prize for innovation that has been presented since 1969 to honour a wide variety of engineering feats, including the CT scanner and Rolls-Royce’s Pegasus engine used in the Harrier jump jet.
Take your excavating to the next level with the JCB 19c-1E. Click Here to find out More
Happy Christmas from all at Gunn JCB !
Wishing you a festive and joyful Christmas from Gunn JCB!
From all of us at Gunn JCB, we’d like to take the time to offer our best wishes for Christmas and New Year.
Thank you all so much for your business throughout the year, and we look forward to working together in 2023.
Just a reminder of our Christmas and New Year Opening times, Click here: Christmas Opening Hours.
Christmas Opening Hours
Just a reminder that all our depots will close at 5.30 pm on Friday, 23rd December, and reopen at 7.30 am on Tuesday, 3rd January 2023.
As always, we will operate an out-of-hours emergency call-out service (0800 004 2008) for which a charge applies.
Merry Christmas and Happy New Year from all of us at Gunn JCB.
Our 2022 Christmas Catalogue is Live
It’s that time of year again, and with Christmas coming up quickly, are you still looking for the perfect gift?
You don’t have to worry anymore because we have something special for everyone at Gunn JCB. Whether you’re looking for a coat that will keep your loved ones warm during this cold winter season, a leather watch to keep everyone on time, or a toy model to entertain your kids, we have all these items and more!
Shop Now And Give The Perfect Gift!
Click Here to VIEW of Christmas Catalogue
Black Friday Starts Monday 21 November
Are you ready?
We are excited to announce our Black Friday deals start Monday, 21st November. So stay tuned to see what’s on offer! We’ve got machinery, parts, and a mystery deal not to be missed! More will be announced next week.
In the meantime, if you can’t wait until then, take a look at our Latest Offers for some great deals already available today.