Call Us
0161 941 2631
 

Buckets

6 in 1 Bucket

  • Increases machine versatility dozing, loading, digging, grabbing, spreading and grading from one unit.

Dedicated Ditch Maintenance Bucket

  • Purpose designed for use with a quick hitch.
  • Drain holes that reduce weight and density during operation and give better fill factor.
  • A central reinforcing plate gives added strength and rigidity.
  • A rolled top section increases structural integrity.

Deep Profile Bucket

  • This range offers the operator a large selecton of widths to suit the requirement and to minimise trench backfill.
  • The range has been designed and manufactured to match the machine capability.
  • A range of replacement bolt on wearparts are available that will prolong durability and maintain maximum production.

Individual_Mobile_Deep_Profile_Bucket_768x512

Ditch Maintenance Bucket

  • Drain holes that reduce weight and density during operation and give better fill factor.
  • A central reinforcing plate gives added strength and rigidity.
  • A rolled top section increases structural integrity.

Individual_Mobile_Ditch_Maintenance_Bucket_768x512

GP Bucket

  • A rolled top section increases structural integrity.
  • Side plate reinforcement offers additional strength and rigidity.
  • Replaceable wear parts increase durability and extend the working life.
  • Pivot pins/ kits available to enable quick hitch mounting for increased productivity.
  • The GP bucket range has been designed using Finite Element Analysis throughout the engineering process.

Individual_Mobile_GP_Bucket_768x512

Grading Bucket

  • This range has been designed and manufactured to match the machine capability.
  • With drain holes that reduce weight and density during operation.

Individual_Mobile_Grading_Bucket_768x512

Heavy Duty Bucket

  • This range offers the operator a large selecton of widths to suit the requirement and to minimise trench backfill.
  • Trapezoidal Beam enhances the tough robust design, with tapered sides for easier trenching and emptying.
  • Wear strips, cheek plates and side shroud as standard coupled with the double skinned shell to ensure extended service life.
  • The replacement V33SYL wear parts maintain high production and longer service life.

Jaw Bucket

  • This direct mount bucket has been designed and manufactured to match the machine capability.
  • It can be utilised as a standar digging bucket or a powerful hydraulic jaw.
  • The design with its additional wear strips offers increased strength and wear resistance.

Individual_Mobile_Jaw_Bucket_768x512

JCB Dedicated Bucket

  • Purpose designed for use with a quick hitch.
  • Pin sets close to bucket shell boost tear out force.
  • Long, flat base improves bottom trenching and load retention.

Individual_Mobile_JCB_Dedicated_Bucket_768x512

Ribbed Bucket

  • This range offers the operator a large selection of widths to suit the requirement and to minimise trench backfill.
  • The range has been designed and manufactured to match the machine capability.
  • A range of replacement bolt on wearparts are available that will prolong durability and maintain maximum production.

Individual_Mobile_JCB_Ribbed_Bucket_768x512

Landscape Bucket

  • Low back and longer bucket floor provide excellent visibility to cutting edge, while maintaining high breakout forces.

Light Material Bucket

  • High capacity buckets for re-handling and transporting lightweight materials.

Ripper Bucket

  • Powerful penetration from unique, staggered ripper teeth.
  • Increased productivity: three times faster than single pointed ripper.
  • Forked teeth boost material break-up.
  • Ability to rip and remove broken material in one pass.

Individual_Mobile_Ripper_bucket_768x512

Rock Bucket

  • Heavy duty construction with additional internal ribs and rear wear strips.
  • Delta shaped toe plate for improved penetration.
  • ‘MTG’ tooth system.
  • ‘MTG’ hard wearing toe plate lip and bucket heel shrouds and side cutter protection.

Individual_Mobile_Rock_Bucket_768x512

Square Hole Bucket

  • Designed for specific municipal applications.
  • This bucket has been designed and manufactured to match the machine capability.
  • A range of replacement bolt on wearparts are available that will prolong durability and maintain maximum production are available.

Individual_Mobile_Square_Hole_Grave_Digger_Bucket_768x512

Tapered Ditching Bucket

  • A selection of profiles that enables the operator shallow or steep sided ditch forming.
  • The double box section cross beam increases structural integrity and durability.
  • Fitted with standard wear parts to help increase service life.

Individual_Mobile_Tapered_Ditching_Bucket_768x512

Tilting Grading Bucket

  • Designed and manufactured to match the machine capability.
  • Allows greater operator flexibility without the need to keep re-positioning the machine.